About the quality inspection of the food packaging vibrating plate

Since the food packaging vibrating plate is a non-standard machine, the inspection methods are not the same, but the ever-changing can be summed up in three points:
First: look at the size. This is mainly for customers who have special requirements for size, for example, due to the limitation of the customer's space for placing the food packaging feeding vibrating plate, or the placement of the machine is different, or there are requirements for the feeding frequency, relatively speaking, the food packaging feeding The size of the vibrating plate has corresponding requirements. Of course, for customers who have requirements, the size of the food packaging feeding vibrating plate has been controlled from the beginning of production, but before leaving the factory, it is necessary to do a dimensional inspection for customers who have requirements: Snap button food packaging feeding vibrating plate The diameter of the outlet, the height of the outlet, the tangent length of the outlet, the length of the straight vibration, and so on.
Second: to see if the material is jammed. Whether the food packaging feeding vibrating plate is stuck is an important criterion to evaluate the success of the food packaging feeding vibrating plate. Anyone who has used the vibrating plate for the feeding of food packaging knows that the most troublesome thing is that the vibrating plate for the feeding of food packaging is jammed. Generally, the vibrating plate for the feeding of food packaging is used semi-automatically. Now, but there are many fully automatic machines with food packaging vibrating discs on an assembly line. The quality of the food packaging vibrating discs has already affected the quality of the entire machine. It is not possible to simply test for ten minutes and twenty minutes to check whether the food packaging feeding vibrating plate is stuck. After the food packaging feeding vibrating plate is all completed, the test machine should last for at least three hours. For special materials, the test time should be appropriately increased. .
Third: Check whether there are materials in different directions when testing the machine. The jargon of using food packaging to feed the vibrating plate is whether there is any reverse material. Needless to say, this can not be used in light of the opposite, but it still affects the operation of the entire line, so it is equally important. The point of testing counterfeit materials is to try for a long enough time. The rest is to check whether the appearance of the food packaging feeding vibrating plate has a cape, whether the efficiency can be reached, and so on.