Welcome to the official website of Shenzhen Auclays Automation Equipment Co., Ltd!

Hotline：0755-2877-7995

language：CN丨English

1
+

The principle of automatic flake machine

After sorting through the vibrating plate of the led plug-in machine, when the parts are detected, the machine clamps the two pins of the led. If it is normally turned on, it will emit light. The machine allows this process. Try to turn on again, the individual can turn on at this moment, and then allow it to pass. If it still does not turn on at this time, it is identified that the LED is damaged, and it will automatically fall into the bad parts collection box. Work.

Shenzhen Oakles Automation Equipment Co., Ltd. launched a new machine - specially for the led industry

Special introduction:

The led automatic plug-in machine is an automatic plug-in machine that comes into being in response to the current hot LED industry at home and abroad. Xinzegu automatic plug-in machine xg-3000 can be equipped with a vibrating plate, pour the bulk led on the vibrating plate, the machine automatically recognizes the polarity, automatically recognizes the interests, automatically sorts, and automatically feeds through the guide rails. plug-in machine.

How to tell polarity?

The package is transparent. Through the outer casing, you can see that the shape of the outer electrode is different. The positive pole is the uninhibited block, and the negative pole is the small dot. The digital multimeter has an item that measures the continuity of the point road, and the icon is a diode and a small speaker. When the red wire of the multimeter is connected to the positive pole of the led and the black wire is connected to the negative pole of the led, the led will be lit.

Prev

What is the difference between automation and non-standard automation?

Engineering case

Next